Risca full-house replacement — survey, supply & install
Three things shape every full-house replacement install in Risca: the age of the brick, the prevailing weather off bridging at reveals, and what your neighbours have already done. Our spec uses A+ uPVC or aluminium frames and one consistent foil/RAL across every elevation, with typically 2–4 days depending on count, with a final snag visit a week later on site. Crews work out of vans serving NP11 weekly.
10/10 on Checkatrade across Risca and Newport
Over 50 verified reviews from Gwent homeowners. 10-year product on every frame, 2-year fitting on the whole package, single point of contact.
- Hillside estate exposure at Ty-Sign where wind hits every elevationOur full-house replacement address this with A+ uPVC or aluminium frames.
- Riverside damp near the Ebbw and the risk of cold bridging at revealsOur full-house replacement address this with A+ uPVC or aluminium frames.
- Constant A467 traffic noise for houses fronting the main roadOur full-house replacement address this with A+ uPVC or aluminium frames.
Why Risca homeowners choose us
Owner occupiers doing the whole property in one go
Why full-house replacement look different to owner occupiers doing the whole property in one go
The reader here has decided the whole property needs doing and is now comparing installers rather than products. That means the useful information is programme length, who is actually on site, and what the written quote covers opening by opening.
What this buyer actually needs from us
- One survey covering every opening, measured and photographed
- Matching frame colour and hardware finish across the whole property
- Cylinders come out of the box, get numbered, and are the last thing fitted, so a lost cylinder does not stall the day.
- The gasket is dressed into every corner with a specific gasket tool, not a screwdriver, so the corner stays sharp.
Recent whole property jobs, itemised quotes and the guarantee that covers the package rather than each frame separately
Recent work near Risca
NP4 · February 2026Composite door installFrom quote to fitting, faultless. The new door looks stunning and the security upgrade is night and day. Thanks Rosac!
NP12 · December 2025New windows throughoutBrilliant from start to finish. Quote was honest, install was tidy and the house feels so much warmer. Top job.
How we build full-house replacement
Front-to-back schedule: front elevation first, sides, then rear; one team on site each day; rubbish cleared nightly.
- • A+ uPVC or aluminium frames
- • argon-filled units
- • matched hardware finishes throughout
- • composite front door included
Guarantee: 10-year product on every frame, 2-year fitting on the whole package, single point of contact.
What we typically find on full-house replacement surveys around here
- ·The top hinge on the front door has torn its middle screw out and been left to run on two fixings.
- ·The gasket join at the bottom corner has separated by a few millimetres — that's where the draught is coming from.
- ·The transom bar has a live crack in the plastic, opened up by summer expansion cycles.
- ·The front-door hinge screws are 25mm chipboard fixings, not the manufacturer's 60mm hinge screws.
- ·The friction hinge on a bedroom window has one detent — it either opens fully or slams shut on any breeze.
- ·The letter plate cover has snapped off and the exposed brush strip has flattened over the years.
- ·A cracked pane has been temporarily patched with clear tape and left for six months.
- ·One of the sealed units carries the previous installer's phone number etched on the aluminium spacer bar.
- ·A cat flap has been cut through the lower panel of the back door, weakening the panel and voiding warranty.
- ·The garden gate side of the property gets no direct sun and the frames there look ten years newer than the fronts.
- ·The georgian bar between panes on one unit has slipped off its top spacer and is sitting diagonally inside the sealed cavity.
- ·A homemade timber threshold has been screwed to the concrete cill in front of the patio door.
- ·The threshold weather bar is missing its rubber blade — you can see daylight under the door.
- ·The internal reveal architrave has been re-fixed with panel pins that have rusted and stained the paintwork.
- ·A previous owner has fitted a chain to the front door on top of the multipoint — a sign they never trusted the lock.
- ·The letterbox opening is not draught-proofed at all — a candle held two feet away flickers in a light wind.
Why residents are booking full-house replacement right now
- ·The homeowner is expecting a Grandchild to stay for extended visits and wants the guest room genuinely warm overnight.
- ·The resident wants the patio door to slide with one finger — not the two-handed heave the current one takes.
- ·The buyer wants a genuine Which? Trusted Trader install, not a subcontracted crew running the badge.
- ·The owner is done with the annual condensation season and wants the fabric of the openings to end it.
- ·The owner has an ageing parent visiting for extended stays and wants the guest bedroom warmer than it currently is.
- ·The buyer is buying the property specifically for the garden and wants a bi-fold that opens the whole rear elevation.
- ·The owner wants the whole property refurbished for a big family gathering nine weeks out — everything sequenced tightly.
- ·The homeowner wants the property EPC to move up a band ahead of a remortgage in six months.
- ·The owner is done with the sliding door drag and wants one that closes with a single push.
- ·The buyer wants the front door delivered pre-hung and pre-glazed on the same date as the frames.
- ·The owner wants the crew to talk to the neighbour before scaffold goes up on a shared party wall.
- ·The resident is done with condensation-driven mould at the sill line every February.
- ·The owner has watched the bay corner posts sag for a decade and now wants them straight and structural.
- ·The homeowner wants the crew to catch anything the vendor's survey missed while they're on site.
- ·The buyer wants the frames branded with the manufacturer's paperwork stapled to the frame chamber for the next owner.
- ·The buyer wants the frames to still look right in twenty years, not just at handover.
How our fitters actually do the work
- ·The fitting van is stocked with the specific spare parts likely to be needed on the day — not a return trip on a missing hinge.
- ·Fixings are always at the reinforcement points — a screw through the chamber alone loosens within a year.
- ·The client is left with the manufacturer's paperwork in a labelled envelope, not a folded receipt tucked inside a drawer.
- ·We de-glaze into a padded rack, not straight into the skip — the intact panes go to a glazier for reuse.
- ·The lead fitter leaves a handwritten note of anything the client should watch in the first month, not a printed generic checklist.
- ·The screws through the outer frame go into pilot-drilled masonry, not driven with hammer action alone.
- ·The reveal is brushed down and vacuumed before any sealant runs, so the bead adheres to substrate, not dust.
- ·The frame drainage caps are proven flowing before the beading goes in — a bottle of water down the outer chamber.
- ·The concrete cill under the frame is checked for cracks; a hairline gets a slurry fix before the frame is set.
- ·The door slab gets a full inspection before hanging — dents, delamination, edge integrity, all noted before fixings go through.
- ·The new frame is stood in the reveal dry before any fixings go in — a final chance to catch a wrong-hand delivery.
- ·The old debris leaves in a single tidy load — not skip visits three days apart.
- ·The internal architrave is scored along its length with a fresh blade before removal, so the wallpaper does not tear back.
- ·The client's paint colour is sampled at the survey visit and matched at the office before the fitters arrive on install day.
- ·The old frame comes out in one piece where possible so the reveal detail is not chased through with a demolition bar.
- ·The dustsheet inside the room is a heavy canvas taped to the skirting, not a light plastic left loose.
FAQs — full-house replacement in Risca
What guarantee do I get when you fit full-house replacement in Risca?+
10-year product on every frame, 2-year fitting on the whole package, single point of contact. We're insured to work right across Caerphilly County Borough Council's area, and you have one named contact from quote to snag.
How do you reach jobs in Risca from your base?+
A straight run on the A468 then A467, close enough that we handle Risca callbacks within the same week — typically a short run via A467.
Can full-house replacement handle hillside estate exposure at Ty-Sign where wind hits every elevation?+
Directly, yes — whole property reset to a-rated thermal performance for a 20-year horizon. That matters in Risca where hillside estate exposure at Ty-Sign where wind hits every elevation is the single most common reason people call us.
Do you cover Newport and Caerphilly as well?+
Yes — Newport is roughly 5 miles from Risca, Caerphilly about 6. Same team, same prices, same guarantee.
How long does a full-house replacement install take in a Risca property?+
Typically 2–4 days depending on count, with a final snag visit a week later. Most of the Victorian terraces along the valley floor at Pontymister and Crosskeys we see in Risca fit our standard schedule with no surprises.
Can I stage a whole house replacement over two visits?+
Yes. Front elevation and front door first, rear later is a common split. It costs slightly more overall than doing everything in one visit and we will show you the difference in writing before you decide.
Do I have to use the same specification in every room?+
No, and it is usually cheaper not to. Triple glazing where noise or cold is the real complaint, A rated double elsewhere, obscure glass in bathrooms. We price the options side by side at survey.
Get the whole house priced in one quote in Risca
One visit, one written figure, every opening listed separately so you can see exactly where the money goes. Full-house replacement for Risca and the Caerphilly County Borough Council area, typically 2–4 days depending on count, with a final snag visit a week later, with a written price inside 24 hours.
Summary — full-house replacement in Risca
From Pontymister to Ty-Sign, our patch is small enough that we'll see your finished full-house replacement install ten times a year. That keeps us honest around Risca. Get in touch when you're ready. On full-house replacement specifically: the false economy of replacing one tired window at a time while the others keep failing, typically 2–4 days depending on count, with a final snag visit a week later, 10-year product on every frame, 2-year fitting on the whole package, single point of contact.
Faults we fix before recommending full-house replacement
A draught is usually a compression problem — gasket, hinge or seal — long before it's a reason to replace the window.
Rot in the bottom rail is repairable; rot that has reached the joints and the cill usually isn't worth chasing.
Yellowing is cosmetic and treatable; splits at the welded corners are structural and aren't.
Let's make your house feel more like home.
Fill in a few details and we'll come back within 24 hours with a clear quote — no callout fee, no pressure.