French Doors That Stick Or Won't Shut
French doors are a pair, so the fault is usually in how the two leaves meet rather than in either leaf on its own.
Most people landing here want one thing: to get a pair of doors meeting cleanly again without ripping the set out. That's what this page answers — no scare tactics, no automatic upsell to a full replacement.
What you'll notice first
- the two leaves catch on each other in the middle as they close
- the slave leaf shoot bolts no longer drop into their sockets
- a visible taper in the gap down the meeting stile
- one leaf closing fine while the other needs a firm pull
What actually causes it
- 1the master leaf dropping on its hinges and closing the middle gap
- 2the slave leaf shoot bolt sockets clogged or out of alignment
- 3the frame flexing because the head has no packing above it
- 4seasonal expansion on a sun-facing pair with dark foiled frames
Your realistic options
Both leaves reset at the hinges, shoot bolt sockets cleaned and repositioned, then the pair set so the meeting stiles close parallel.
New keeps and a fresh gasket run restore compression, which stops the draught that usually arrives alongside the sticking.
Where the frame has bowed in a wide opening or the leaves have distorted, a new set — with the head properly packed this time — is the durable answer.
French doors are very often adjustable back to perfect. The exception is a wide opening where the frame head has deflected, because that pushes the leaves out of parallel every time you correct them and it will keep coming back until the structure above is dealt with.
What we check on survey
- we check the gap down the meeting stile top to bottom before touching anything
- we test each shoot bolt individually with the other leaf open
- we look for deflection in the frame head, which is the fault that keeps returning
- we confirm the threshold is still level across the opening
How it's priced
Realignment is a single short visit. Keeps and gaskets add a small parts cost. A replacement pair is priced by overall width, glazing spec and whether a threshold change is needed.
How urgent is it? Fairly prompt. If the shoot bolts aren't engaging, only the master leaf lock is holding the pair shut, and that's not adequate security on a rear elevation.
Stopping it coming back
- always drop the slave leaf bolts before locking — leaving them up loads the meeting stile
- oil the shoot bolts and hinges twice a year
- don't let the doors swing in the wind; a gust into an open leaf is what bends a hinge
French Doors That Stick Or Won't Shut — questions we get asked
Why do my French doors only stick in summer?
Dark frames on a sunny elevation expand. If the pair was set with minimal clearance, they'll bind at the hottest point of the year and free up again in autumn.
The slave door bolts won't drop — what's wrong?
Usually the socket has filled with debris or the leaf has moved a few millimetres. Both are adjustment jobs, not replacement jobs.
Can French doors be adjusted or do I need new ones?
Adjusted, in most cases. Replacement is honest advice only where the frame or the leaves have physically distorted.
Should I switch to bi-folds?
Only if you want the full opening clear. For a standard two-metre opening a well-set pair of French doors is simpler, cheaper and easier to use day to day.
If replacement is the answer
French Doors That Stick Or Won't Shut in your town
Other faults worth ruling out
Fog between the panes means the sealed unit has failed — the glass can usually be swapped without touching the frame.
ReadA sliding door that fights you is nearly always rollers and track debris, not a dead door.
ReadHandles are a cheap wearing part — the trick is matching spindle length, backset and screw centres so it fits first time.
ReadLet's make your house feel more like home.
Fill in a few details and we'll come back within 24 hours with a clear quote — no callout fee, no pressure.