Full-house replacement fitted across Caerleon & NP18
If you're looking at full-house replacement for a home in Caerleon, you're probably dealing with conservation-area rules on frame profile and colour or damp rising from the Usk floodplain on the lower streets — both common in the Roman-era heritage streets, stone cottages near the amphitheatre, Victorian terraces along the High Street and 90s executive builds on Roman Reach you find across NP18. We've fitted hundreds of sets across Ultra Pontem, Bulmore and Ponthir, all signed off under Newport City Council building standards. We sequence the install so terraced neighbours and parked cars aren't blocked all week — a real concern on Welsh valley streets.
Why Caerleon homeowners choose us
- 1Free site survey
- 2Written quote within 24h
- 3Frames built to spec
- 4Single-day install
- 5Snag visit at 1 week
Full-house replacement across Caerleon
- Ultra Pontem
- Bulmore
- Ponthir
- Christchurch
- Llanhennock
- Roman Reach
- Langstone
- Kemeys Inferior
- Malpas
- Cats Ash
- Llangybi
Owner occupiers doing the whole property in one go
Buying full-house replacement as owner occupiers doing the whole property in one go
Whole property work is a different purchase to a single replacement. You are buying two to four days of disruption, a matched set of frames and one point of contact, so this page concentrates on those three things.
What we build into the quote for you
- An itemised written price so single openings can be added or dropped
- A programme that keeps the house lockable and weathertight every night
- The threshold is bedded on butyl mastic under the outer skin, giving the fitter a second waterproof line behind the perimeter silicone.
- The old cylinder is disposed of by the crew, not left in a bag on the drive for the client to bin.
Recent whole property jobs, itemised quotes and the guarantee that covers the package rather than each frame separately
Caerleon at a glance
- Council
- Newport City
- Postcodes
- NP18
- Main route
- B4236
- Nearest town
- Newport (3 mi)
Riverside village with Roman roots — heritage streets on one side, modern estates on the other.
How we build full-house replacement
Front-to-back schedule: front elevation first, sides, then rear; one team on site each day; rubbish cleared nightly.
- • A+ uPVC or aluminium frames
- • argon-filled units
- • matched hardware finishes throughout
- • composite front door included
Guarantee: 10-year product on every frame, 2-year fitting on the whole package, single point of contact.
What we typically find on full-house replacement surveys around here
- ·The bottom rail on the sash has taken years of rain runoff and swollen enough to bind on the frame.
- ·The frame reinforcement steel inside the outer frame has begun to rust and stain the internal white finish.
- ·Original door furniture is 90s brass, tarnished, and no longer matches anything else on the elevation.
- ·The internal glazing bead across the top of the bay lifts out completely with fingernail pressure.
- ·A cracked pane has been temporarily patched with clear tape and left for six months.
- ·The friction hinge on a bedroom window has one detent — it either opens fully or slams shut on any breeze.
- ·The bay-corner post has bowed by about 4mm across two metres — visible only if you sight along it.
- ·The trickle-vent covers have been snapped off and taped over from inside.
- ·Every south-facing frame has visible micro-cracking in the surface film — early sign of UV embrittlement.
- ·The georgian bar between panes on one unit has slipped off its top spacer and is sitting diagonally inside the sealed cavity.
- ·The bay corner post has never had its structural bracket — a common corner-cutting shortcut a decade ago.
- ·The composite door skin has a UV bloom on the south-facing elevation that no longer matches the colour on the shaded elevation.
- ·A weep vent that was factory-drilled has been over-painted three times and no longer clears water from the chamber.
- ·The escutcheon on the front door is loose and rotates as the key turns.
- ·One casement's friction stay has been swapped for a random spare that doesn't match the arm geometry.
- ·A previous cylinder swap left the escutcheon plate rotating freely — a snap risk that nobody logged.
Why residents are booking full-house replacement right now
- ·The resident wants the front to look distinct on a street of five identical houses.
- ·The resident is expecting an elderly parent to move in and needs a door that opens without a shove.
- ·The owner is done with the biannual repaint of the timber back door and wants a paint-free equivalent.
- ·The insurance renewal notice flagged a locks upgrade requirement and the owner wants it done before the policy anniversary.
- ·The resident wants the frames to survive a specific paint colour on the render for at least a decade.
- ·The homeowner is fine spending more if the crew is right — the price is the last question, not the first.
- ·The homeowner has finally accepted the timber back door is beyond another repaint and wants the like-for-like replacement design chosen with them.
- ·The homeowner has just re-rendered the front elevation and wants the frames to be the last piece of the picture.
- ·The homeowner is preparing the property for a smart-home installation and wants sensor pockets designed into the reveals.
- ·The homeowner is selling within eighteen months and wants the front elevation to photograph well for the listing.
- ·The owner is dealing with a partner who works nights and needs the bedroom acoustically watertight before summer.
- ·The homeowner is expecting a Grandchild to stay for extended visits and wants the guest room genuinely warm overnight.
- ·The owner wants the frames to disappear visually and let the view do the work.
- ·The homeowner has quotes for a new kitchen next spring and wants the patio doors in before those trades arrive.
- ·The wife wants the noise from the trunk road down; the husband wants the heating bill down; both are on the enquiry.
- ·The owner wants the master bedroom quiet enough for a night-shift partner to sleep past 11am.
How our fitters actually do the work
- ·The internal architrave is scored along its length with a fresh blade before removal, so the wallpaper does not tear back.
- ·The door hinges are set with the correct rise before the frame is finally fixed — retro-adjustment on cheap hinges is limited.
- ·The crew leaves the client with a printed adjustment card so the multipoint keeps can be re-set six months on without a callout.
- ·The frame perimeter is checked with a smoke pencil for airtightness before the internal trims go on.
- ·The threshold ramp on an accessible door is set to a maximum 15mm rise, checked with a spirit-level lip.
- ·The old timber cill under a uPVC swap is treated with a boron preservative before the new frame is set over it.
- ·The multipoint hooks are lightly greased after fitting, before the door is closed for the first time.
- ·The window board is scribed to the plaster line, not left with a caulked gap that shows in raking light.
- ·The frame reinforcement is chosen for the wind load exposure of the elevation, not the smallest steel that fits.
- ·The manufacturer's serial-number label on the new frame is peeled off, not left to yellow on the glass for years.
- ·The frame drainage caps face outward and are set proud enough that they don't clog with a season of rainwater.
- ·The glazing bead is tapped in with a rubber mallet, not a metal claw — the profile marks otherwise.
- ·The install team pull the fridge out for kitchen-window swaps only after checking the flooring can take the drag scuff.
- ·The frame perimeter sealant is a low-modulus polymer where the substrate is going to move — plain silicone otherwise.
- ·The threshold sealant runs the full width with a single tool pass, not stitched together in inches.
- ·The screws through the outer frame go into pilot-drilled masonry, not driven with hammer action alone.
FAQs — full-house replacement in Caerleon
Do you fit full-house replacement across all of Caerleon?+
Yes — we work across every NP18 postcode, from Ultra Pontem through to Bulmore, and out as far as Ponthir. Straight in off M4 J25 or the B4236 — Caerleon is one of our quickest same-day survey runs.
Can full-house replacement handle conservation-area rules on frame profile and colour?+
Directly, yes — whole property reset to a-rated thermal performance for a 20-year horizon. That matters in Caerleon where conservation-area rules on frame profile and colour is the single most common reason people call us.
Will full-house replacement suit the older Roman-era heritage streets common around Caerleon?+
We sequence the install so terraced neighbours and parked cars aren't blocked all week — a real concern on Welsh valley streets. We've installed dozens in Ultra Pontem and Bulmore alone.
How do you reach jobs in Caerleon from your base?+
Straight in off M4 J25 or the B4236 — Caerleon is one of our quickest same-day survey runs — typically a short run via B4236.
How long does a full-house replacement install take in a Caerleon property?+
Typically 2–4 days depending on count, with a final snag visit a week later. Most of the Roman-era heritage streets we see in Caerleon fit our standard schedule with no surprises.
Can I stage a whole house replacement over two visits?+
Yes. Front elevation and front door first, rear later is a common split. It costs slightly more overall than doing everything in one visit and we will show you the difference in writing before you decide.
Will the house be secure overnight during a full replacement?+
Yes. Only one elevation is open at a time and every opening we start is finished, glazed and locked before we leave for the day.
Get a fixed full-house replacement quote for Caerleon this week
Quote in writing within 24 hours. Most NP18 jobs are booked in within 3 weeks of acceptance.
Request my quotePlan the work around your household in Caerleon
Tell us the rooms you cannot lose and we will sequence the elevations around them. Most properties are finished in two to four days. Full-house replacement for Caerleon and the Newport City Council area, typically 2–4 days depending on count, with a final snag visit a week later, with a written price inside 24 hours.
Summary — full-house replacement in Caerleon
What you're paying for: A+ uPVC or aluminium frames, 10-year product on every frame, 2-year fitting on the whole package, single point of contact, and a team that's spent years in NP18 rather than passing through it. No subbies, no surprise day-of charges, and straight in off M4 J25 or the B4236 — Caerleon is one of our quickest same-day survey runs. On full-house replacement specifically: the false economy of replacing one tired window at a time while the others keep failing, typically 2–4 days depending on count, with a final snag visit a week later, 10-year product on every frame, 2-year fitting on the whole package, single point of contact.
Faults we fix before recommending full-house replacement
A draught is usually a compression problem — gasket, hinge or seal — long before it's a reason to replace the window.
Rot in the bottom rail is repairable; rot that has reached the joints and the cill usually isn't worth chasing.
Yellowing is cosmetic and treatable; splits at the welded corners are structural and aren't.
Let's make your house feel more like home.
Fill in a few details and we'll come back within 24 hours with a clear quote — no callout fee, no pressure.